Friday, 29 December 2017
When a person thinks about the fact that they are cleaning toilets, then that's when they usually run into problems. Always remember that the consequences of your efforts will be worth it in case you can overcome the irritating parts of the cleansing effort.
Use the correct tools
The first thing you should do is discover some good toilet cleansers and also clean brushes or sponges so that you can rub them properly. Despite the fact that it may sound a bit intense, once you do it a couple of times you will feel like you have always cleaned toilets.
Have general cleaning
Then apply a general cleaning of the container, using generous measures of disinfectant or cleaning specialist and a brush for cups. Always make a point to follow the course provided for the cleaner and there should be adequate ventilation while working and in a perfect world, use eye and skin safety.
Windows and mirrors
The first thing people see when they enter the bathroom are the separators and the mirrors. It is important to keep them clean and aesthetically pleasing, so make sure you clean them properly.
The best thing you can do is scrape the separators and mirrors of all the dirt and grime. Fill a spray bottle with 1/3 measure of white vinegar and one measure of rubbing alcohol; It can also include 1 tablespoon of dishwasher detergent programmed. Spray evenly and rub along the separators and mirrors. Alcohol and detergent should leave surfaces clean and new.
Tubs and showers
Nobody wants to get in a dirty bathtub. In what capacity can you clean a dirty and unhealthy bathtub? The best thing to do is scrub the tub and lower the speed of the shower to influence cleanliness and invitation.
The tap water contains a compound called alkaline, which leaves stains on the shower dividers and glass doors. As any housekeeper knows, this is not good for your bathroom. Place some auto wax on a sponge and use it to rub where dirt tends to accumulate. The glass is a porous material and the wax is used to seal these pores so that the alkaline does not enter them.
You can lower the temperature of a bathroom without a shower, a sink, a bathtub or even a window to surround the air, but you cannot have a bathroom without a toilet. The septic idea of the toilet leaves housewives needing more powerful ways to keep toilets free of alkaline stains in tap water.
To get rid of stains
The good step to take is to empty the vinegar into the toilet, in any case, once a month. Try not to overdo it unless you need to end up with a destroyed toilet. This should eliminate the problem and keep the toilet clean and new.
Use plastic brushes
It is also good to apply a plastic cleaning brush; Keep a strategic distance from the toilet brushes with metal wires, as they can scratch and permanently damage the toilet.
The sink is the place where most of the land, except what enters the toilet, end up being dragged down the drain. In case something happens, the sink requires regular cleaning. Like shower and toilet dividers, alkaline water in tap water tends to soil the surface of the tub with stains and marks on the rings. The best cleaners use fundamental elements in the kitchen such as vinegar and pop for baking.
Pour pop cook and a little white vinegar down the drain. Wait one hour and then continue with warm water. This should eliminate most deposits in the sink. This also works for kitchen drains, showers and bathtubs.
The best thing to do with the spigots is to get rid of the alkaline buildup around them and in the drainage territories. Dip a towel in vinegar and roll it around the accessory. Then place the drain and pour a significant portion of a measure of white vinegar into the sink, and wait. It requires investment for the vinegar to disintegrate the deposits, but soon your pan will look good as new.
First, empty the amount of water you can reasonably expect from the container; Not merely does this allow you to function directly on the dirt, but it also shows that there is minimal water to reduce the power the cleaning substance you may be applying.
Lower water levels
You can reduce the level of water by first killing the water outlet and then pouring a big container of water into the toilet as a way manually cleaning the toilet, in all cases empting as much water through the funnels as you can reasonably expect.
Download your toilets
After you have everything you need, you can begin cleaning efforts by spraying the toilet or throwing some powder in there and prepare it for the washing stage. Then you can clean up to the point where it is clean. Wash the toilet and flush the toilet of most cleaning fluids or powders and then have a new toilet. Have this picture in your mind so that next time you recognize what you are looking for.
Clean dark spots
In the middle of the cleaning process, you should focus on extremely dark surfaces, both in the internal and external parts of the toilet. This begins by eliminating the association between the primary pump and the toilet. After which, the toilet bowl must be rinsed several times to the point that all the water saved is exhausted. Then, you can start the work.
Remove stains with various cleaning agents, for example, muriatic corrosive agents, and individual detergents, according to your preferences. Treat all surfaces while brushing, cleaning or spraying the cleaning operator. Once the entire surface of the toilet has been finished, you can now start to reload the water cellar. Keep in mind that you must put disinfectant in the toilet bowl to help extend the cleaning process. In case you have run out of paper towels, and visitors approach and need to clean the baby's fingerprints from the sliding glass door, take the newspaper and soak it in vinegar. Clean the vinegar on the glass and rub until it is relatively dry. Then shine with a dry sheet of paper or daily material.
Posted by Unknown at 01:14